Vossen HFX-5 – 22×9.5 – 6×139.7 – ET20 – Deep Face – 106.1 – Gloss Gunmetal Wheel

Hybrid Forged Depth and Finish That Changes How a Truck Sits on the Road

The Vossen VOSHFX5-2G22 is a 22-inch by 9.5-inch Hybrid Forged wheel engineered for 6×139.7 bolt pattern trucks and SUVs. Sized at 22×9.5 with a +20 offset and a 106.1mm center bore, the VOSHFX5-2G22 is a direct fitment for Toyota Tacoma, Tundra, 4Runner, FJ Cruiser, and Lexus GX platforms that demand a premium deep-face wheel with a production-quality finish. The Deep Face profile and Gloss Gunmetal finish make the VOSHFX5-2G22 one of Vossen’s most popular HFX-5 configurations for lifted and stock-height 6×139.7 applications.

Key Features

• Hybrid Forged construction: flow-formed barrel bonded to a forged-grade center for weight reduction and strength
• Deep Face profile for an aggressive concave stance on trucks and SUVs
• Gloss Gunmetal finish applied and quality-inspected at the Vossen facility
• 22×9.5 sizing with +20 offset (ET20) for proper stance on 6×139.7 applications
• 106.1mm hub bore engineered for Toyota and Lexus truck platforms
• 6×139.7 bolt pattern fits Tacoma, Tundra, 4Runner, FJ Cruiser, GX460, and GX470
• Sold individually as VOSHFX5-2G22
• Backed by Vossen’s quality standard and finish warranty

Fitment

Specifications

What’s Included

• 1 VOSHFX5-2G22 Vossen HFX-5 22×9.5 Gloss Gunmetal wheel
• Does not include tires, lug nuts, or TPMS sensors
• Hub-centric rings may be required depending on vehicle hub bore

About Vossen

Vossen Wheels is a Miami-based wheel manufacturer known for its Hybrid Forged, Cast, and Forged monoblock programs. The HFX-5 is purpose-built for 6-lug trucks and SUVs and uses a flow-forming process on the barrel combined with a forged-grade center to achieve a weight and strength advantage over traditional cast wheels. Vossen applies all finishes in-house to exacting quality standards, and each VOSHFX5-2G22 is inspected before shipment.

Frequently Asked Questions

What vehicles does the VOSHFX5-2G22 fit?

The VOSHFX5-2G22 is designed for vehicles with a 6×139.7 bolt pattern and 106.1mm hub bore, including the Toyota Tacoma, Tundra, 4Runner, FJ Cruiser, Lexus GX460, GX470, Nissan Titan, and Nissan Frontier. Always verify offset clearance for your specific trim and suspension configuration.

Is the VOSHFX5-2G22 sold as a single wheel or a set of four?

The VOSHFX5-2G22 is sold individually. Purchase four units for a complete set.

What does ET20 offset mean on the VOSHFX5-2G22?

ET20 means the mounting face of the VOSHFX5-2G22 is 20mm outboard of the wheel centerline. This positions the wheel slightly outside center, which is typical for trucks with factory fender clearance. For lifted applications, a spacer or lower offset may be preferred depending on suspension geometry.

Does the VOSHFX5-2G22 require hub-centric rings?

The VOSHFX5-2G22 has a 106.1mm center bore, which matches Toyota and Lexus 6×139.7 truck platforms directly. No hub-centric rings are required for those vehicles. Verify your vehicle’s center bore before ordering if uncertain.

What finish is on the VOSHFX5-2G22?

The VOSHFX5-2G22 ships in Gloss Gunmetal, a factory-applied finish inspected by Vossen before shipment. No additional coating is needed. Standard automotive wash products are safe for this finish.

What is Hybrid Forged construction on the Vossen HFX-5?

Hybrid Forged means the HFX-5 uses a flow-forming process on the barrel section and a forged-grade center to reduce weight and increase radial strength compared to traditional gravity cast wheels. This makes the VOSHFX5-2G22 lighter per inch of width than a standard cast wheel of the same size.

What lug nuts do I need for the VOSHFX5-2G22?

Lug nut selection depends on the seat type machined into the VOSHFX5-2G22. Vossen HFX-5 wheels typically use a conical seat. Verify the seat angle and thread pitch for your specific vehicle before purchasing lug hardware. Lug nuts are not included.

What tire size works with the VOSHFX5-2G22 on a Tacoma or 4Runner?

A 265/50R22 or 285/45R22 are common tire pairings for the VOSHFX5-2G22 on a Toyota Tacoma or 4Runner. Fitment varies by suspension lift, fender clearance, and trim. Consult a fitment specialist for your specific setup.

Installation Instructions

1. Verify that your vehicle has a 6×139.7 bolt pattern and 106.1mm center bore before mounting.
2. Clean the hub face and wheel mounting surface to remove rust, debris, or old hub rings.
3. Seat the VOSHFX5-2G22 on the hub and hand-thread lug nuts in a star pattern.
4. Torque lug nuts to vehicle manufacturer specification in two passes using a calibrated torque wrench.
5. Re-torque after 25 to 50 miles of driving to account for seating.
6. Install TPMS sensors if required for your vehicle before mounting tires.